Hebei Ruijie Pipe Industry Co., Ltd. is one of the most reliable manufacturers and suppliers of ppr end plug in China. With abundant experience, we warmly welcome you to buy high quality ppr end plug for sale here from our factory. Also, pricelist and free sample are available.
Ruijie PPR End Plug is a dedicated sealing accessory for PPR piping systems, used for pipeline pressure testing, temporary sealing of pipe ends, and sealing of pipeline terminals. The product is a one-piece injection molded unit, and comes standard with a matching rubber sealing ring. After installation and tightening, it achieves an effective seal. Available in orange, green, and white, it matches the color scheme of the same series of PPR pipes and fittings, and can be purchased in conjunction with our PPR straight pipes, elbows, tees, valves, and other accessories.
| Specification |
| 20mm |
| 25mm |
| 32mm |
Core Advantages
- -
One-piece injection molding, no seams, stable structure, and resistant to cracking under long-term pressure; built-in hexagonal locking point at the end allows for easy tightening with a standard wrench, preventing slippage.
01
Matching EPDM sealing gaskets ensures a tight fit between the gasket and the plug, preventing thread leakage and eliminating the need for additional Teflon tape wrapping, effectively improving on-site construction efficiency.
02
The raw material is resistant to acid and alkali corrosion, does not rust, and is not prone to scaling. It is suitable for sealing the ends of pipes in exposed locations, pipe wells, and ceiling access points for easy maintenance. For concealed buried sections, it is recommended to reserve an access point or use heat fusion sealing.
03
Standardized thread size, highly versatile, compatible with mainstream PPR internal thread fittings, and compatible with most brands of PPR pipes.
04
Applicable Scenarios
· Sealing the ends of hot and cold water pipes in residential decoration;
· Temporary sealing of pipes during pressure testing in newly renovated houses;
· Sealing of reserved openings in water supply and drainage pipes in hotels, apartments, and commercial buildings;
· Sealing of solar water heating pipes;
· Sealing of reserved ports in water purification systems.
Advantages of Procurement:
PPR END PLUG, as a small accessory for PPR pipes, can be ordered together with PPR straight pipes, various heat fusion fittings, copper fittings, and valves. Products from the same manufacturer have standardized threads, eliminating size compatibility issues. Consolidated shipping maximizes container capacity and effectively controls ocean freight costs. Factory inspection documents are available for each shipment, meeting the requirements for overseas project acceptance and customs clearance verification.
Construction and Usage Instructions：
1. This product is a threaded sealing fitting. For optimal sealing performance, use with the original rubber sealing ring.
2. Tighten with moderate force. Excessive force may cause thread cracking and product damage.
3. Applicable media are limited to clean water (hot and cold water). Do not use for conveying corrosive fluids such as strong acids or alkalis.
4. Store in a dry, dark environment. Prolonged direct sunlight will accelerate the aging of the plastic and rubber sealing rings.
5. Only compatible with PPR water supply piping systems. Not recommended for use in gas or high-pressure industrial fluid piping systems.
We welcome inquiries from domestic and international customers. We support sample testing, small and large batch orders, and can provide supporting documentation and customization services. We look forward to establishing a stable and long-term partnership with you!
Hot Tags: ppr end plug, China ppr end plug manufacturers, factory, Brass Thread PPR Pipe Fitting, PPR Elbow Joint, PPR Fittings Reduce Socket, PPR Plumbing Material Fitting, PPR Stop Valves, PPR Three prong Connector
