PPR Stop Valve

PPR Stop Valve

• Nominal Size: 20/25/32/40/50/63mm, compatible with same-OD PPR pipes
• Material: PPR; Brass
• Operating Conditions: Rated pressure PN1.6MPa at normal temperature (derated at high temperature), long-term ≤70℃, short-term peak 95℃
• Connection: Standard PPR heat fusion socket ends on both sides
• Operation: Manual handwheel multi-turn rotation, continuous stepless adjustment, opening degree perceptible by rotation count
• Color: White valve body + red handwheel
Send Inquiry
Description

Hebei Ruijie Pipe Industry Co., Ltd. is one of the most reliable manufacturers and suppliers of ppr stop valve in China. With abundant experience, we warmly welcome you to buy high quality ppr stop valve for sale here from our factory. Also, pricelist and free sample are available.

 

The PPR stop valve is a precision water control component for PPR piping systems. It features a food-grade PPR valve body; rotating the handwheel drives the metal lift disc to achieve full open, full close, and continuous flow regulation. With reliable sealing and higher precision than ball valves, it is widely used in branch pipe control for building hot and cold water, equipment inlet flow regulation, and maintenance isolation.

 

Core Advantages

 

Precise Flow Control

Lift disc enables continuous stepless adjustment, suitable for precision water control scenarios such as equipment inlets and branch pipe pressure division, offering better adjustment performance than ball valves which are only suitable for on/off.

01

Tapered Sealing

Disc and seat feature tapered surface contact for tight closure with no leakage. No lateral friction during operation, resulting in minimal wear and long service life.

02

Food-Grade Safety

Non-toxic and odorless PPR valve body meets drinking water hygiene standards, suitable for potable water lines.

03

Heat Fusion Integration

Both ends are heat fused to form a permanent integral connection, eliminating joint leakage risks, ideal for concealed and buried installations.

04

Easy Maintenance

Valve stem assembly is detachable and replaceable without removing the valve body or piping; local replacement of seals and discs is sufficient.

05

04

Selection Guide

1. By Size: 20-25mm (kitchen/bathroom branch pipes) → 32-40mm (main inlet/villa main water pipes) → 50-63mm (commercial/project main pipes)

2. By Condition: Cold water: PN1.25 (S5 series); Universal hot/cold water: PN1.6 (S4 series); High-rise/centralized hot water: higher pressure rating + stainless steel disc

3. By Function: For precise flow control, choose stop valve; for quick on/off only, choose ball valve; for buried wall installation, prioritize heat fusion integrated type

 

Installation and Usage

• Direction: Valve body is marked with flow direction arrow. Install following "low in, high out" principle. Reverse installation is strictly prohibited.

• Heat Fusion: Heat at 260℃±10℃, insert vertically into socket to marked position, cool down, then pressure test (1.5 times working pressure, stable pressure with no leakage).

• Operation: Rotate handwheel slowly to avoid water hammer from sudden opening/closing. Drain water when out of use in winter to prevent freezing.

• Maintenance: Slight stem leakage can be fixed by tightening gland nut; continuous leakage requires stopping operation and replacing seals; operate periodically if unused for long periods to prevent seizing.

02

 

 

FAQ

Q: How to choose between stop valve and ball valve?

A: Choose stop valve for precise flow control (high multi-turn adjustment accuracy); choose ball valve for quick on/off only (90° fast switching, low resistance).

Q: Can it regulate hot water?

A: Yes. Heat-resistant PPR valve body + EPDM seals, long-term resistance to 70℃ hot water, short-term peak 95℃, suitable for both hot and cold water.

Q: Does leakage mean the valve body is broken?

A: Not necessarily. Heat fusion joint leakage is mostly due to construction issues; stem leakage is mostly due to seal aging and can be fixed by replacing parts; only valve body cracks require full valve replacement.

Q: Can it be buried in the wall?

A: Yes. Heat fusion joints are reliable, but installation near access panels or operable positions is recommended; if buried, use high-quality products.

 

Combining precise flow control and reliable sealing, the PPR Stop Valve is your ideal choice. Contact us for selection guidance and customization services. We look forward to cooperating with you.

Hot Tags: ppr stop valve, China ppr stop valve manufacturers, factory, PPR Air Release Valve, PPR Butterfly Valve, PPR Flow Control Valve, PPR Fusion Shutoff Valve, PPR Hot Water Shutoff Valve, PPR Water Supply Valve

Send Inquiry
Send Inquiry